Sod Installation Services In Buffalo

Want to Start a New Lawn? Use These Sod Installation Tips

New sod installation is the best and the fastest way to start new grass, and it won’t be an exaggeration to say it will give you an “instant lawn.”

Unquestionably sod installation requires a fair amount of prep work, time, and energy. Also, the sod needs to be watered and monitored meticulously until it is established. 

Better ditch all lawn worries on expert shoulders and get your dream lawn – with no difficulty. Connect with Prime Landscapers– your local sod installation buffalo NY company and allow us to beautify your garden instantly.

But if you still want to give it a try to do sod installation, here is a quick guide for you.

 Before Starting Sod Installation

 A successful project of sod installation must start with testing the soil’s pH level – and it should be between 6.0 to 7.5.

 There are two ways of doing this:

  1. Buying a test soil kit
  2. With the help extension office

Understanding the pH level of the soil can be a bit challenging – especially if you are new to it. Hire us, and we’ll do it all for you at no extra cost.

Sod Installation Steps

 1. Prepare the ground to lay the sod

The process of sod installation is very similar to growing grass from seeds – except for the final part you are laying the sod. Before starting, you need to prep the soil, and this is how to do it:

2. Choose the right time

If you’re laying warm-season grass, you can do it any time of the year. But if you are working with cool-season grasses, it’s better to start in spring, late summer, or early fall.

3. Start with bare ground

If you have an existing lawn, remove the grass using herbicides, digging them out, or removing them with a machine.

4. Amend the soil (if necessary)

If the soil’s pH level is not what it should be, you must amend the soil.

5. Roughout the soil

To loosen up the soil, use a rototiller and till the ground.

6. Treat the soil

Apply fertilizers and soil conditioner and push them in the ground using a rototiller.

7. Level out the ground

Anything chunky or heaps on the soil must be made smooth and uniform. You can use a roller or with your hand. Don’t compact the soil.

How To Lay Sod

Talk to us, and we’ll do the Sod Installation in your property at reasonable rates at your own time in your own comfort. Laying sod by experts gives you a guarantee, and in case of any problems, you can always contact us.

To lay sod by ownself, follow these steps:

1. Start on the Edges

Begin your sod installation by laying them first on the outer edges. Start with the far left side, then move towards the far right and then walk towards the center.

2. Lay rolls carefully

 You may need separate rolls to cover the whole lawn. If that’s the case, make sure the ends of the rolls are pressed firmly and tightly without overlapping.

3. Maintain the lawn level

After installing, if the sod appears too low, use some topsoil to bring it up to a proper level.

4. Use a roller

After laying the sod, use a roller to push the sod against the soil. This will remove any air pockets allowing good contact of the sod roots to the soil.

5. Water the sod

People are often confused asking about the best time to water sod. And the answer to that is to water your sod regularly for at least a couple of weeks.

Remember, watering sod is not only about wetting the grass blades. But what’s underneath actually counts. Having said that, never overwater the new grass.

Leave a Comment

Your email address will not be published. Required fields are marked *

one × 1 =